TEX1002TFT
Compact stereo transmitter TFT Edition 1.000W.
COD.: TEX1002TFT
Potencia: 1.000W
Features
High quality modern transmitter at an extremely low price, compact, non-deformable and light because it is made of stainless steel chassis. It guarantees high continuity of operation in any working condition through an automatic control (ALC) and a Foldback protection with adjustable output power from 10 to 100%.
It has standard L&R, Mono, MPX and SCA / RDS analogue audio inputs, with the possibility of TOSLINK and optional AES / EBU as well as the integrated RDS encoder (UECP standard Low distortion values, a high signal-to-noise ratio, combined with saving of energy and environmental resources of high yields (over 70% on the whole band) ensures an excellent transmission service.
Limited maintenance is facilitated by extreme accessibility, resulting from an advanced modular engineering, and by a water-washable air filter.
A complete control based on ARM microprocessor, from interactive menus on TFT Touch display of all the main parameters and an integrated WEB / SNMP telemetry system (optionally) guarantee full compliance with EC, FCC and CCIR regulations.
TEX1002TFT | ||||
Parameter | U.M. | Value | Notes | |
GENERALS | ||||
Frequency range | MHz | 87,5 ÷ 108 | ||
Rated output power | W | 1000 | Continuously adjustable from 10 to 100% | |
Modulation type | F300E | |||
Operational mode | Mono, Stereo, MPX | |||
Working temperature | °C | -5 to +50 | ||
Working humidity | % | 95 | No condensing | |
Working altitude | mt | Up to 3000 * | * With adequate air evacuation system in site | |
Frequency setting | kHz | 10 | Steps | |
Frequency stability | Temperature range from -5°C to 50°C | ppm | ±1 | |
Modulation capability | Refered @ 0dBu for 75kHz | kHz | 150 | Meets or exceeds all FCC and CCIR rules |
Pre-emphasis | μS | 0 50, 75 | Selectable | |
POWER REQUIREMENTS | ||||
AC Power input | AC Supply Voltage | VAC | 230 ±15% | |
AC Apparent Power Consumption | VA | 1450 | ||
Active Power Consumption | W | 1447 | ||
Power Factor | 0,998 | |||
Overall Efficiency | % | Typical 70 * | * Up to 72 in specific conditions | |
Connector | VDE 16A | |||
MECHANICAL DIMENSIONS | ||||
Phisical dimensions | Front panel width | mm / inch | 483 / 19 | EIA rack |
Front panel height | mm / inch | 88 / 3 1/2 | 2HE | |
Overall depth | mm | 561 | ||
Chassis depth | mm | 470 | ||
Weight | kg | Approx. 11 | ||
Cooling | Forced, with internal fan | |||
Acoustic noise | dBA | < 75 | ||
AUDIO INPUTS | ||||
Left/Mono | Connector | XLR F | ||
Type | Balanced | |||
Impedance | Ohm | 10 or 600 k | ||
Input Level / Adjust | dBu | -12 to +12 | Continuosly adjustable | |
Right | Connector | XLR F | ||
Type | Balanced | |||
Impedance | Ohm | 10 or 600 k | ||
Input Level / Adjust | dBu | -12 to +12 | Continuosly adjustable | |
MPX | Connector | BNC | ||
Type | Unbalanced | |||
Impedance | Ohm | 10 k | ||
Input Level / Adjust | dBu | -12 to +12 | For 75 KHz FM, adjustable | |
SCA/RDS | Connector | 2 x BNC | ||
Type | Unbalanced | |||
Impedance | Ohm | 10 k | ||
Subcarier Level @ 0 dBu | dB | -17 to -40 | For 7,5 KHz FM, adjustable | |
AES/EBU (OPTIONAL) | Connector | XLR F | ||
Type | Balanced | |||
Impedance | Ohm | 110 | ||
Input Level / Adjust | dBfs | 0 to -10 | For 7,5 KHz FM, adjustable | |
TOSLINK (OPTIONAL) | Connector | TOSLINK | ||
Type | Optical | |||
OUTPUTS | ||||
RF Output | Connector | 7/8” | ||
Impedance | Ohm | 50 | ||
RF Monitor | Connector | BNC | ||
Impedance | Ohm | 50 | ||
Output Level | dBm | 0 ± 4 | ||
Pilot output | Connector | BNC | ||
Load Impedance | Ohm | >5 k | ||
Output Level | Vpp | 1 | Sinusoidal | |
FUSES | ||||
On mains | 2 External fuse F 16 A – 6×30 mm | |||
On services | X | |||
On PA Supply | X | |||
On driver supply | X |